Jewelry Tunes... How To

Step 1: 

Press and hold the red record button on the sound module to record your message or song, you will hear one beep and have 60 seconds to record.

Step 2:

Release the button to finish recording your message or song. If you hear 2 beeps this means your recording was successful. Test your recording by placing the module in the box, when you open the box to expose the module to light, your recording will play. You can re-record as many times as needed.

Step 3:

When you are satisfied with your recording, remove the adhesive backing from the back of the sound module to secure in the bottom of the box, re-insert the jewelry foam on top of the sound module and close the box.

Please note:

• Playback is activated with light, so Jewelry Tunes™ may not work in a dark room or outside at night.

• When recording, hold the sound module 3-4 inches from the sound source to avoid noise distortion.